Fresh saltwater spill? Treated within 6 weeks, most sites need one application and no lab work.Call 832-244-3811
NaClean calculator

How much NaClean does your site need?

Answer four questions and get a gallon estimate in seconds. New spills need no lab work. Older sites use the numbers from your soil test.

1How old is the spill?
2What’s the soil like?

Not sure? Sticky and cracks when dry is clay. Gritty and drains fast is sandy.

3How big is the area?

Include the dripline of any trees you want to save.

4Rain on the site since the spill?

Rain pushes sodium onto the clay. Each inch adds about 20% to the dose.

How the numbers work

New spill

First Response chart

Within 6 to 8 weeks, the salt is still mostly free in the soil water, so the dose comes from soil type and area alone, treated 3 ft deep. Add 20% for an inch of rain and 40% for two. Past 3 inches of rain or 8 weeks, sodium has started binding to the clay and the site needs a soil test.

Gallons per acre: sandy 500 · sandy loam 750 · loam 900 · clay loam 1,000 · heavy clay 1,250

Older site

Sizing formula

Once sodium is bound, the dose comes from how much has to come off: the share of exchange sites above 12% ESP, times how many sites the clay has, times the soil volume. The 6.5 field factor was developed by Texas A&M for R&A’s stabilized ammonium.

(ESP − 12) × CEC × Depth (ft) × Acres × 6.5 = gallons

Mix NaClean with water before you apply it: 10 parts water to 1 or more on completely dead ground, more than 30 to 1 around trees and green vegetation. To save trees, saturate the root bed out to the dripline at the higher dilution, then flush with fresh water. Apply with a trash pump and hose. How the chemistry works →

Get a free site assessment

Tell us what spilled, when, and roughly how big. That's enough for us to start.

Rather talk now?
832-244-3811rob@saltclean.co
I'm looking for
What spilled
When did it happen

Lab results (ESP, SAR, chlorides or TPH) help us size the job, but they aren't required.

What happens next
  1. We review your details.Spill type, age and size tell us most of what we need.
  2. We call you.We talk through the site, access, and any regulatory deadline.
  3. You get a plan and an estimate.Product with dosing instructions, a full-service bid, or both.