Questions we hear on every site.
Straight answers on saltwater spills, from the people who have treated more than 3,400 acres of them. Don’t see yours? Call 832-244-3811.
Your spill
What’s the difference between a new spill and a historical one?
A new spill is under 6 to 8 weeks old with less than 3 inches of rain on it. The salt is still mostly dissolved in the soil water, so the soil is saline but not yet sodic. We dose from our First Response chart using soil type and area alone, usually with no lab work. It often takes one application, and trees can usually be saved if treated quickly.
A historical spill has had time and rain push sodium onto the clay. The soil seals, water stops moving, and the site stays bare, sometimes for decades. These sites need a routine salinity analysis with extracted ESP (TX sodium panel or LA 29-B), about 4 to 8 composite samples per acre. We usually rip the soil to 3 feet and bulk it with hay before treatment, then dose from the soil test.
The difference matters for cost: every inch of rain on an untreated spill binds more sodium, and the dose climbs with it. See how much your site needs →
How fast do we need to act?
As fast as you can. Trees can die within 1 to 3 weeks of a spill, and each inch of rain binds more sodium to the clay. Treating within the first 6 weeks is the cheapest moment a site will ever have.
Should we flush the spill with fresh water?
Usually not. Flushing an untreated spill moves sodium onto the clay faster and can raise ESP by several points per inch of water. Treat first, then water it in.
Do we need lab work before you can quote?
Not for a new spill. Size, soil type and age are enough to dose from the First Response chart. Older sites need a routine salinity analysis with extracted ESP so we can calculate the exact amount of NaClean. We can take the samples for you.
Isn’t chloride the contaminant?
The EPA lists chloride under its Secondary Drinking Water Standards at 250 mg/L. Secondary standards cover “nuisance” chemicals that affect taste, odor or color; the EPA does not enforce them and does not consider them a health risk (EPA). States such as Texas, New Mexico and Louisiana do measure chloride after a release, as a marker for saltwater contamination. But chloride is not what damages the soil. It stays dissolved and drains out with rain. The lasting harm comes from sodium bound to the clay, which is what NaClean removes.
In-situ vs dig and haul
What are the benefits of treating in place?
- A fraction of the cost. Excavating one acre 3 feet deep moves about 4,840 cubic yards and runs $850,000 to $1.75 million depending on region. A new spill treated in place typically costs $15,000 to $30,000 an acre.
- Nothing hauled to a landfill. No contaminated soil to dig, truck, dispose of and replace with fill.
- Faster. Grass typically returns in 4 to 9 months, without waiting on excavation crews, trucks and fill.
- Light on the site. NaClean is sprayed on with a pump and hose. No heavy equipment in the woods, no torn-up lease roads.
- Keeps your topsoil. The native soil stays and recovers, so vegetation comes back on its own ground.
- Saves trees. Treated quickly, trees in the spill path can usually be kept alive.
Why not just add gypsum?
Gypsum works on the same principle, supplying calcium to replace sodium, but it dissolves slowly and can take years. NaClean delivers soluble calcium plus stabilized ammonium in liquid form, so the exchange happens in weeks and the ammonium feeds regrowth. How the chemistry works →
Cost and buying
What does it cost?
It depends on three things: how big the site is, how old the spill is, and how much clay is in the soil. Our field estimates for treating one acre:
| When treatment starts | Estimated cost per acre |
|---|---|
| New spill | $15,000–30,000 |
| 6 months | ~$150,000 |
| 12 months | ~$400,000 |
| 24 months | $750,000+ |
| Dig and haul, any age | $850,000–1,750,000 |
Full-service jobs are bid to completion, with no separate charges for mobilization, hotels, mileage, labor or equipment. For product only, use the NaClean calculator to estimate gallons, then ask us for a quote. The site assessment is free.
Do I need the product or the service?
Buy the product if you have a crew, a trash pump and hose, and good access to the site. This works well for new spills and smaller areas. We calculate the dose and dilution from your site details and stay on the phone through the job.
Hire R&A for large or legacy scars, sites with a regulatory deadline, or when you need sampling and closure tracking handled for you. We assess, sample, treat and re-sample on one bid.
Not sure? Start with a free site assessment and we’ll tell you which makes sense.
How much NaClean will my site need?
New spills are dosed by soil type and area: 500 gallons per acre on sandy soil up to 1,250 on heavy clay, plus 20% for each inch of rain. Older sites use the sizing formula (ESP − 12) × CEC × Depth (ft) × Acres × 6.5. The NaClean calculator does both.
Can our own crew apply it?
Yes. Most customers buy NaClean and apply it themselves. Mix it with 10 parts water or more on bare ground, more than 30 to 1 around trees, spray it on with a trash pump and hose, then water it in.
Where do you work?
R&A is based in Willis, Texas, and has treated sites across Texas, Louisiana, Oklahoma and Wyoming. NaClean ships nationwide.
Results and closure
How long until grass comes back?
On our completed sites, typically 4 to 9 months from treatment, depending on soil, rainfall and how long the salt had been there. We re-sample at 60 to 90 days to track progress.
Will it meet our state’s closure requirements?
We sample and track sites to the criteria your regulator uses, such as the Texas Railroad Commission, New Mexico OCD or Louisiana 29-B. Tell us the regulator on the assessment form.
What results have you documented?
On a Port Hudson, Louisiana site, ESP dropped from 37% to 2.7% with tall grass in 6 months. A 20-year-old scar in Carthage, Texas went from 45% to 3% ESP and was fully grassed in 9 months. In Fannett, Texas, a new 2.6-acre spill closed for $42,000 against a $2.2 million dig-and-haul estimate. See all results →
Is SaltClean the same as NaClean?
Yes. NaClean is the product, made by R&A Technology. SaltClean is the name of this website and our saltwater cleanup program. Same chemistry, same company, same people on the phone.
Do you handle oil spills too?
Yes. HC Max binds crude oil and condensate so native soil microbes can break it down in place, and Remedi-Zorb handles small spills. Oil spill cleanup →
Get a free site assessment
Tell us what spilled, when, and roughly how big. That's enough for us to start.
- We review your details.Spill type, age and size tell us most of what we need.
- We call you.We talk through the site, access, and any regulatory deadline.
- You get a plan and an estimate.Product with dosing instructions, a full-service bid, or both.